Installing an External Camera Trigger on a Raspberry Pi and Octoprint
Corona Designs’ Raspberry Pi dSLR camera trigger is a very useful device to allow the Raspberry Pi to trigger an external camera. Either manually, or automatically, there are many ways to use the trigger. This post provides instructions on how to install the device, and configure software to trigger an external camera. The trigger can…
Introducing a Raspberry Pi GPIO Hardware Trigger for SLR Cameras
Corona Designs is introducing a simple camera trigger to interface directly with Raspberry Pi’s GPIO header. This allows for the Raspberry Pi to automatically control any camera compatible with a standard remote shutter release. This device is useful for creating computer-controlled timelapse photography, stop motion photography, or other remotely controlled or automatic photography based on other…
dSLR External Zoom & Focus Driver
The dSLR External Zoom & Focus Driver project will provide a simple and effective way to externally control zoom or focus of dSLR lenses. The primary intent of this is for use with time-lapse photography, where small increments of zoom or focus are made before or after each frame. This device could be used for videography as…
3D Printed Camera Dolly for Video or Time-lapse Photography
Overview Adding motion to time-lapse photography and video shots adds depth and interest to your scene. Doing this, however, can be a tricky task. Time-lapses using long exposures need to have a still scene during each exposure. Movement of the camera must be made in-between shots. To do this, a stable rig is needed, as is control of the…